Influence of Filler Size Variation on the Hardness, Thermal,and Moisture Absorption Properties of Wood Apple/PineCone Reinforced Areca Fiber Hybrid Composites
Keywords:
Biomass, Waste utilisation, TGA, Water absorption, HardnessAbstract
The ever-growing agricultural biomass has created a lot of burden on the already over-burdened landfills, and has also led to increase in methane emissions from its burning. Therefore, the utilisation of this abundant biomass has become essential nowadays for the sustainable development of environment friendly materials. This work investigates the
physicochemical and mechanical properties of lignocellulosic biomass reinforced polymer composite. In particular, a comparison was made between two sets of composites based on wood apple and pine cone fillers in terms of their size variation and its effect on their thermal, water absorption, and hardness properties. The results indicate that the filler size variation had a notable impact on the composite. Thermogravimetric analysis revealed that specific filler sizes improved thermal stability by limiting the polymeric chain mobility. In contrast, water absorption was found to increase with larger filler sizes due to particle agglomeration and void formation. The pine cone composites notably displayed higher moisture absorption than the wood apple composites due to the presence
of higher hemicellulose content in pine cones. Contrarily, hardness values decreased as the filler size increased, attributed to agglomeration of fillers at large size. However, pine cone composites demonstrated superior hardness overall attributed to the higher amount of lignin present in pine cones. These findings highlight the necessity of optimizing filler size and selecting appropriate waste derivatives to balance thermal stability, moisture resistance, and mechanical strength in composites.
References
[1] Global Assessment: Urgent Steps Must Be Taken to Reduce Methane Emissions Decade. UNEP. https://www.unep.org/news-and-stories/press-release/global-assessment-urgent-steps-must-be-taken-reduce-methane Accessed 2025-03-31
[2] World Bank: Global Waste to Grow by 70 Percent by 2050 Unless Urgent Action Is Taken: World Bank Report. https://www.worldbank.org/en/news/press-release/2018/09/20/global-waste-to-grow-by-70-percent-by-2050-unless-urgent-action-is-taken-world-bank-reportAccessed 2025-04-01
[3] The World Has a Waste Problem. Here’s How to Fix It. IFC. https://www.ifc.org/en/blogs/2024/the-world-has-a-waste-problem Accessed 2025-04-01
[4] The Ever Growing Global Waste Management Problem. Blue Planet. https://blueplanet.asia/blog/the-ever-growing-global-waste-management-problem Accessed 2025-04-01
[5] U.N.E. Programme, I.S.W. Association: Global Waste Management Outlook 2024: Beyond an Age of Waste– Turning Rubbish Into a Resource, (2024). https://doi.org/10.59117/20.500.11822/44939
[6] United Nations: International Day of Zero Waste. https://www.un.org
[7] The Growing Environmental Risks of E-Waste. Geneva Environment Network. https://www.genevaenvironmentnetwork.org/resources/updates/the-growing-environmental-risks-of-e-waste/Accessed 2025-04-01
[8] Plastic Planet: How Tiny Plastic Particles Are Polluting Our Soil. UNEP. https://www.unep.org/news-and-stories/story/plastic-planet-how-tiny-plastic-particles-are-polluting-our-soil Accessed 2025-04-01
[9] Lin, D., Yang, G., Dou, P., Qian, S., Zhao, L., Yang, Y., Fanin, N.: Microplastics negatively affect soil fauna but stimulate microbial activity: Insights from a field-based microplastic addition experiment. Proceedings of the Royal Society B: Biological Sciences 287 (2020) https://doi.org/10.1098/RSPB.2020.1268
[10] Microplastics. National Geographic. microplastics/ Accessed 2025-04-01
https://education.nationalgeographic.org/resource/
[11] Apple Unveils Its First Carbon Neutral Products. Apple. https://www.apple.com/in/newsroom/2023/09/apple-unveils-its-first-carbon-neutral-products/ Accessed 2025-04-04
[12] A Look at How We’re Building More Sustainable Hardware. Google. https://blog.google/products/platforms-devices/a-look-at-how-were-building-more-sustainable-hardware/ Accessed 2025-04-04
[13] Gerald Arul Selvan, M., Antony Miraculas, G., Brailson Mansingh, B., Binoj, J.S.: Chromolaenaodorata stem biowaste as natural bio-reinforcement for polymer composites: Effective waste management technique. International Journal of Environmental Science and Technology 22, 4777–4790 (2024)
https://doi.org/10.1007/S13762-024-05927-8
[14] Yu, T., Ren, J., Li, S., Yuan, H., Li, Y.: Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites. Composites Part A: Applied Science and Manufacturing 41, 499–505 (2010)
https://doi.org/10.1016/J.COMPOSITESA.2009.12.006
[15] Hong, C.K., Hwang, I., Kim, N., Park, D.H., Hwang, B.S., Nah, C.: Mechanical properties of silanized jute–polypropylene composites. Journal of Industrial and Engineering Chemistry 14, 71–76 (2008) https://doi.org/10.1016/J.JIEC.2007.07.002
[16] Tiwari, S., Bijwe, J.: Influence of fiber-matrix interface on abrasive wear performance of polymer composites. Journal of Reinforced Plastics and Composites 33, 115–126 (2014) https://doi.org/10.1177/0731684413505786
[17] Mahapatra, T.K., Satapathy, S., Panda, S.K.: Sound absorbing and insulation characteristics of textile waste-reinforced polymeric composite materials. Transactions of the Indian Institute of Metals 78, 1–11 (2025) https://doi.org/10.1007/S12666-024-03515-5
[18] Ali, K.S.A., Ravi, S., Mohanavel, V., Ayyar, M., Kathiresan, S., Kannan, S., Munimathan, A., Soudagar, M.E.M., Kaliappan, S.: Effect of continuous fiber reinforcement on mechanical and tribological characteristics of cellulose and human hair fiber polymer composites. Results in Engineering 25, 104480
(2025) https://doi.org/10.1016/J.RINENG.2025.104480
[19] Nor Arman, N.S., Chen, R.S., Ahmad, S.: Review of state-of-the-art studies on the water absorption capacity of agricultural fiber-reinforced polymer composites for sustainable construction. Construction and Building Materials 302, 124174 (2021) https://doi.org/10.1016/j.conbuildmat.2021.124174
[20] Chen, R.S., Ahmad, S., Gan, S.: Rice husk bio-filler reinforced polymer blends of recycled hdpe/pet: Three-dimensional stability under water immersion and mechanical performance. Polymer Composites 39, 2695–2704 (2018) https://doi.org/10.1002/pc.24260
[21] Shakuntala, O., Raghavendra, G., Samir Kumar, A.: Effect of filler loading on mechanical and tribological properties of wood apple shell reinforced epoxy composite. Advances in Materials Science and Engineering 2014, 538651 (2014) https://doi.org/10.1155/2014/538651
[22] Ouma, I.L.A., Naidoo, E.B., Ofomaja, A.E.: Thermodynamic, kinetic and spectroscopic investigation of arsenite adsorption mechanism on pine cone-magnetite composite. Journal of Environmental Chemical Engineering (2018) https://doi.org/10.1016/j.jece.2018.08.035
[23] Joshi, R., Bajpai, P.K., Mukhopadhyay, S.: Processing and performance evaluation of agro wastes reinforced bio-based epoxy hybrid composites. Proceedings of the Institution of Mechanical Engineers,
Part L: Journal of Materials: Design and Applications 237, 482–499 (2023) https://doi.org/10.1177/14644207221118686
[24] Tajvidi, M., Azad, F.: Effect of particle size, fiber content and compatibilizer on the long-term water absorption and thickness swelling behavior of reed flour/polypropylene composites. Journal of Reinforced Plastics and Composites 28, 2341–2351 (2009) https://doi.org/10.1177/0731684408091954
[25] Ramlee, N.A., Jawaid, M., Zainudin, E.S., Yamani, S.A.K.: Tensile, physical and morphological properties of oil palm empty fruit bunch/sugarcane bagasse fibre reinforced phenolic hybrid composites. Journal of Materials Research and Technology 8, 3466–3474 (2019) https://doi.org/10.1016/j.jmrt.
2019.06.016
[26] Migneault, S., Koubaa, A., Erchiqui, F., Chaala, A., Englund, K., Wolcott, M.P.: Effects of processing method and fiber size on the structure and properties of wood–plastic composites. Composites Part A: Applied Science and Manufacturing 40, 80–85 (2009) https://doi.org/10.1016/j.compositesa.2008.
10.004
[27] Khalil, H.P.S.A., Shahnaz, S.B.S., Ratnam, M.M., Ahmad, F., Fuaad, N.A.N.: Recycle polypropylene (rpp)- wood saw dust (wsd) composites- part 1: The effect of different filler size and filler loading on mechanical and water absorption properties. Journal of Reinforced Plastics and Composites 25,
1291–1303 (2006) https://doi.org/10.1177/0731684406062060
[28] Bouafif, H., Koubaa, A., Perr´e, P., Cloutier, A.: Effects of fiber characteristics on the physical and mechanical properties of wood plastic composites. Composites Part A: Applied Science and Manufacturing 40, 1975–1981 (2009) https://doi.org/10.1016/j.compositesa.2009.06.003
[29] C´elino, A., Fr´eour, S., Jacquemin, F., Casari, P.: The hygroscopic behavior of plant fibers: A review. Frontiers in Chemistry 1, 43 (2014) https://doi.org/10.3389/fchem.2013.00043
[30] Sathish, T., Giri, J., Shaik, M.R., Kumar, A.: Comparative investigation of mechanical properties in banana fiber and ramie fiber composites enhanced by sic nanoparticles. AIP Advances 14 (2024) https://doi.org/10.1063/5.0207560
[31] Nwaeju-Okechukwu, C.C., Okuma, S.O., El-Rehim, A.F.A., Zahran, H.Y., Edoziuno, F.O.: Optimization of physical and hardness properties of epoxy composites reinforced with meretrix lusoria shell particulates using rsm. Results in Chemistry 18, 102771 (2025) https://doi.org/10.1016/j.rechem.2025.
102771
[32] Barczewski, M., Salasi´nska, K., Szulc, J.: Application of sunflower husk, hazelnut shell and walnut shell as waste agricultural fillers for epoxy-based composites: A study into mechanical behavior related to structural and rheological properties. Polymer Testing 75, 1–11 (2019). https://doi.org/10.1016/j.polymertesting.2019.01.017